Tv Bracket Assemble - Saturn LED32HD800UST2 Instruction

16. The apparatus shall not be
exposed to dripping or splashing and that
no objects filled with liquids, such as
vases, shall be placed on the apparatus.
17. The mains plug or appliance
inlet is used as the disconnect device,
remain it readily operable during the
apparatus normal use.

TV BRACKET ASSEMBLE

1 First, put the TV on the table
smoothly and put some soft close on the
table to avoid scratching the screen.
2 User the screw driver to take off
the 6pcs screws which are fixed on the
bottom stand (the direction of the arrow,
refer to the figure 1)- And take out the
bottom stand (please keep the screws
and bottom stand carefully).
3. Mounting steps ( See below figures 1
to 4 for details):
Step 1: Decide whether or not to use
padding behind the wall mount brackets.
Step 2: Locate and fix the wall mount
brackets with 8 studs into the wooden
part of the plasterboard wall, Details see
Figure2.
18. The main plug of this adaptor is
used as
disconnect device shall remain readily
operable.
Service life – 6 years.
Before putting into operation shelf life
is unlimited.
Step 3: Be sure that the wall mount
brackets are level with each other.
Step 4: Hang the unit on the secured wall
mount brackets.
To ensure
installation, please consult a professional
installer before mounting the unit to the
wail-
Moreover, the spacers can be used in
combination to adjust unit's distance
from the wall in order to match the
mounted Flat-Panel TV. When using the
1/4", 1/2", 3/4", 1" padding, longer
screws must be purchased.
Note:
1. The
optional.
4
disconnect device,
a reliable and
desktop TV bracket
the
sturdy
is