Lexus GX 460 2021 Quick Manual page 85

4
Test the HomeLink
ing the indicator light:
● Indicator light illuminates: Programming of a fixed code device has completed. The
garage door or other device should operate when a HomeLink
released.
● Indicator light flashes rapidly: The garage door opener motor or other device is
equipped with a rolling code. To complete programming, firmly press and hold the
®
HomeLink button for 2 seconds then release it.
● If the garage door or other device does not operate, proceed to "Programming a rolling
code system".
5
Repeat the steps above to program another device for any of the remaining Home-
®
Link buttons.
85
GX460_QG_OM60T24U_(U)
2
3
Press and hold the remote control transmit-
ter button until the HomeLink
light changes from slowly flashing orange to
rapidly flashing green (rolling code) or con-
tinuously lit green (fixed code), then release
the button.
Press and release the remote control trans-
mitter button at 2 second intervals, repeat-
edly, until the HomeLink
changes from slowly flashing (orange) to
rapidly flashing (green) (rolling code) or
continuously lit (green) (fixed code).
®
operation by pressing the newly programmed button and observ-
Point the remote control transmitter for
the device at the rear view mirror, 1 to 3
in. (25 to 75 mm) from the Home-
®
Link buttons.
®
Keep the HomeLink indicator light in
view while programming.
Program a device.
Programming a device other than an
entry gate (for U.S.A. owners)
Programming an entry gate (for U.S.A.
owners)/Programming a device in the
Canadian market
®
®
button is pressed and
®
indicator
indicator light