Delta Arzo 3586 Quick Start Manual

Delta Arzo 3586 Quick Start Manual

Two handle widespread lavatory faucet

Advertisement

Quick Links

U
P C
®
®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
ICC/ANSI A117.1
Model/Modelo/Modèle
3586
Series/Series/Seria
®
Arzo
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Delta
faucet you will need:
READ ALL
READ ALL
water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
LEER TODAS
a es de e
ezar.
LEER TODOS
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
LIRE TOUTES
LIRE TOUS
A e er le o nécessaire de raccordement.
TWO HANDLE WIDESPREAD
LAVATORY FAUCET
LLAVE DE LAVAMANOS
EXTENDIDAS DE DOS MANIJAS
ROBINET À ENTRAXE LONG À
DEUX POIGNÉES POUR LAVABO
1
5/14/12 Rev. B

Advertisement

Table of Contents
loading

Summary of Contents for Delta Arzo 3586

  • Page 1 You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: READ ALL READ ALL water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: LEER TODAS a es de e ezar. LEER TODOS suministro de agua.
  • Page 2: Cleaning And Care

    Any damage to this faucet Delta Faucet Company Masco Canada as a result of misuse, abuse or neglect, or any use of other than genuine Delta® replacement Product Service Technical Service Centre parts WILL VOID THE WARRANTY.
  • Page 3 RP47780▲ Lift Rod Varilla tirador Tirette de vidage H286▲ Handle with button & set screw Manija con boton y tornillo de presion Poignée avec capuchon et vis de calage ▲ RP19754 Aerator - 1.5 GPM (5.7 L/M) Aireador - 1.5 GPM (5.7 L/M) RP47859 Aérateur - 1.5 gal/min (5.7 L/M) Button &...
  • Page 4 Specify Finish Especifíque el Acabado Précisez le Fini RP38958 Pop-Up Assembly Less Lift Rod Ensamble del Desagüe Automático Menos la Barra de Alzar Renvoi Mécanique Sans la Tige de Manoeuvre RP5648 Stopper Tapón Bonde RP33038 Pivot Nut Pivote de Tuerca L’écrou du pivot Metal Flange Brida de Metal...
  • Page 5 Slide hot handle assembly (1) and cold handle assembly Install flange (4) to spout (1) using wrench (8). Align as (2) with gaskets (3) through sink. Note: hot handle desired. Install spout (1) and gasket (2). Secure with assembly is labelled (4). Secure handle assemblies washer &...
  • Page 6 Metal Pop-up Apply silicone to underside of flange (1). Insert body Remove pivot nut (1). Install horizontal rod (2) and Remove stopper (1) and flange (2). (2) into sink. Screw flange (1) into body (2). stopper (3) as removable (4) or non-removable (5). Screw nut (1) all the way down.
  • Page 7 Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull pop-up Remove pivot nut (1). Install horizontal rod (2) Remove stopper (1), brass nut & washer (2), black straight down into drain hole and secure and stopper (3) as removable (4) or gasket (3) and tail piece (4).
  • Page 8: Maintenance

    1/2" (13 mm) IPS Make Connections to water lines: Remove aerator (1) and turn faucet handles (2) all the way on. Maintenance Turn on hot and cold water supplies (3) and flush water lines for Choose hook-ups for 1/2” I.P.S. connections: If faucet leaks from spout outlet - Shut off one minute.

Table of Contents