Index; Emergency Stop - Life Fitness Run CX Owner's Manual & Assembly Instructions

3. Product Overview

Index

Item Description
1 Handlebar
2 Emergency Stop Lanyard
3 Contact Heart Rate Sensors
4 Activity Zone
5 Cup Holder
6 USB Port
7 Console
8 Upright Assembly
9 Rear Roller Adjustment Bolt
10 Walking Belt
11 Side Rail
12 On/Off Switch
13 Power Cord

Emergency Stop

The treadmill is equipped with an Emergency Stop System. The system consists of a rectangular stop magnet (located
on the upper bridge plastic) attached to a safety stop pull cord.
Before starting a workout, attach the lanyard on the safety stop pull cord to an item of the user's clothing. During a
workout, pull the cord to remove the magnet from the bridge. This will immediately stop the treadmill belt.
NOTE: Test the safety stop pull cord by attaching the lanyard to a user's item of clothing during operation of the
treadmill. While the treadmill is on and the console display is active, remove the safety stop pull cord / magnet from
the bridge. A message will be displayed on the console similar to "Replace the emergency stop switch". With the
Page 8 of 31
Qty.
2
1
2
1
2
1
1
2
2
1
2
1
1