Samsung GT-I9500 Service Manual page 93

Level 3 Repair
※ CAUTION
Temperature/Humidity sensor should not be directly exposed to the heat-gun when you replace
USB connector, because excessive heat can cause abnormal operation of the sensor. The
temperature that Temperature/Humidity sensor sees should not exceed 260°C. Use proper heat-
shielding material to protect Temperature/Humidity sensor.
※ Temp/Humi Sensor After Repair
1) Keypad : press *#0*#
2) Select "Sensor"
3) Select "Temp-Humid"
4) Read the COMP data (ignore the RAW data)
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
8-61