Page 1
-es of the product are subject to change without notice. Samsung reserves the right to alter this doc -ument or the product described herein at anytime, without obligation to provide notification of such...
Page 2
Recommended Troubleshooting & Repairing Guide: V3.0 –LED & LCD TV V2.0- LCD TV Repair Repair Tips ebook Tips & Case Histories “More information on T-con Board & Mainboard Secret Repair Tips!” Vol-3 LCD/LED V1.0- Collection of LCD Monitor Repair Case TV Repair Tips Histories by Jestine Yong...
1. Safety Precautions 1-1. Repair Precaution Before attempting any repair or detailed tuning, shield the device from RF noise or static electricity discharges. Use only demagnetized tools that are specifically designed for small electronic repairs, as most electronic parts are sensitive to electromagnetic forces. Use only high quality screwdrivers when servicing products.
Page 5
Safety Precautions 1-2. ESD(Electrostatically Sensitive Devices) Precaution Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha rge and can be easily damaged by it. We recommend protecting these components with cond uctive anti-static bags when you store or transport them. Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate static electricity from your body before repairing ESDs.
Specification 2-2. GSM Tx Power Class TX Power TX Power TX Power TX Power control GSM850 control EGSM900 control DCS1800 control PCS1900 level level level level 33±2 dBm 33±2 dBm 30±3 dBm 30±3 dBm 31±2 dBm 31±2 dBm 28±3 dBm 28±3 dBm 29±2 dBm 29±2 dBm...
Page 20
6. Level 1 Repair 6-1. S/W installation 6-1-1. Required items in order to install S/W Installation program: Downloader Program (Odin3 v3.07.exe) GT-I8730 Mobile Phone Data Cable (GH39-01578B) Mobile device specific S/W: Binary files ※ Settings Connect PC to Phone Using Data Cable...
Page 21
Level 1 Repair 6-1-2. S/W Installation Program (Downloader program) Open up the S/W Installation Program by executing the "Odin3 v3.07.exe"...
Page 22
Level 1 Repair 1. Enable the check mark by click on the following options, - Check Re-Partition, Auto Reboot - Check PIT - Check PDA File...
Page 23
Level 1 Repair 2. Enter into Download Mode - Enter into Download Mode by pressing Volume Down button, OK button, and ON/OFF Button simultaneously. - Press volume up key to enter Download Mode 3. Connect the device to PC via Data Cable. Make sure that the one of communication port [ID:COM] box is highlighted in yellow.
Page 24
Level 1 Repair 5. Disconnect the device from the Data cable. 6. Once the device boots up, you can check the version of the binary file or name by pressing the following code in sequence; *#1234# You can perform factory reset by pressing the following code in sequence; *#87976633#...
7. Level 2 Repair 7-1. Disassembly and Assembly Instructions 7-1-1. Disassembly 1) Unscrew the 9 points of the REAR. 1) Disassmble the rear in the direction as picture. 1) Necessarily disassmble hook 1 point from Front. 1) Unscrew the 1 point from the board...
Page 26
Level 2 Repair 1) Detach the IR LED, Front CAM, Ear jack 1) Detach Sub PBA Connector from the board. connector from the board. 1) Detach the OCTA connector from the board 1) Detach the PBA from the board. 2) Detach the Coxial Cable from board...
Page 27
Level 2 Repair 1) Unscrew 1 point from the Bracket. 1) Detach the Earjack Module from the Bracket. 1) Detach the IR LED, Front CAM from 1) Detach SUS from the Front Ass'y the Bracket.
Page 28
Level 2 Repair 1) Detach the Touch key connector from 1) Detach Motor from the Bracket. the Sub PBA. 1) Detach the SUB PBA from the Bracket...
Page 29
Level 2 Repair 7-1-1. Assembly 1) Attach Sub PBA to the board. 1) Connect Touch Key Connector to Sub PBA. 1) Attach the Motor to the board. 1) Attach IR LED, Front CAM to the board.
Page 30
Level 2 Repair 1) Attach SUS to the board. 1) Attach Ear Jack Module to the Board. 1) Screw 1 Point to the Board 1) Attach the Coxial Cable to the board.
Page 31
Level 2 Repair 1) Attach Coxial Cable to PBA 1) Attach RCV module to the board. 2) Attach the OCTA Connector to the PBA. 1) Attach the Front CAM, IR LED, Earjack 1) Attach the Sub PBA Connector to the board. connector to the board.
Page 32
Level 2 Repair 1) Screw the 1 point from the board 1) Necessarily disassmble hook 1 point from Front. 1) Assembled from the rear when 1) Screw 9 points to the board. assembling the left-hand side...
Page 37
Level 3 Repair 8-3-1. Power On Mobile phone does not power on. Charging the battery by TA. Check the Battery Voltage. If its voltage level is extremely low(under 3.0V), Is it more than 3 . 8V? Change the battery. Power-on the phone and check the power-on sound Change the FRONT-LCD ASSY or motor Vibration.
Page 39
Level 3 Repair 8-3-2. Initial Initial Failure Re-download latest SW on the mobile phone. Abnormal Abnormal Check the OSC5000 (Crack, open etc.) Re Check "8-3-1 Power on" Check the U600 ( Crack etc) Trouble shooting process Normal Change UME300 Abnormal Change PBA...
Level 3 Repair 8-3-3. Sim Part Insert SIM card Reassemble SIM/SD assy and still SIM Is SIM/SD assy well connected to main board? does not work, replace SIM/SD assy Change to the new SIM card. Check the SIM Voltage. (C6 of SIM FPCB) >= 1.8 If it doesn`t still work SIM card after changing or 3.0? the SIM card, Check the U300 (Crack etc)
Level 3 Repair 8-3-5. Microphone Part Check microphone function in voice call receiver mode or in Voice Recording mode Check the main MIC(in Sub PBA[GH59-13075A]) is placed Resolder the main MIC. for any damage Check the offset voltage Resolder main MIC or replace Sub PBA. at below test If the voltage level is not fixed, then point(40;Main_MIC_P)
Page 43
Level 3 Repair R1044 R R R R R R R 1 1 1 0 0 0 0 0 0 0 0 0 4 4 C906 C C C C C C C C 9 9 9 9 9 C C 9 9 9 0 0 0 0 0 0 06 6 6 6 6 C917 C C C C C C...
Level 3 Repair 8-3-6. Speaker Part Check speaker function. Play MP3 with maximum volume level. Reconnect speaker or replace speaker Check the connection of Speaker module module Resolder the Speaker Connector(s) Check Speaker Connectors [3712-001458] are placed for any damage or replace Sub PBA.
Page 45
Level 3 Repair R1044 R R R R R R R 1 1 1 0 0 0 0 0 0 0 0 0 4 4 4 4 4 4 C921 C C C C C C C C 9 9 9 9 9 C9 9 9 2 2 2 2 2 2 921 1 1 C906...
Page 46
Level 3 Repair 8-3-7 Receiver Part Check receiver function in voice call receiver mode. Check the receiver module for any damage (tear in Replace receiver module FPCB, crack, etc) Check the signals on V700, V701 Replace U902 Check V700, V701 crack, open? Replace V700, V701 R1044...
Page 47
Level 3 Repair 8-3-8. No Service No service Check memu setting Menu → applications → setting → wireless and network → mobile networks → network mode → setting is auto mode ? PHONE : I9500XXXX Menu → Phone → Keypad → *#1234# →...
Page 71
Level 3 Repair 8-3-9. BT/WIFI BT/WiFi is not working Check BT or WiFi function Enable BT or WiFi Function Check the Voltage on C805 = Resolder or change the U600 1.8V Check the Voltage on L802 = Resolder or change the L802 1.35V Check the status(crack, missin g, Corrosion..etc) of L800, C8...
Page 72
Level 3 Repair R5009 R R R R R R R 5 R5 5 5 5 R500 5 5 0 0 0 0 0 500 0 0 0 0 00 0 9 9 9 9 9 09 9 L713 L L 7 7 1 1 13 3 3 3 3 3 3 3 3 R5010 R R R R R R R 5...
Page 73
Level 3 Repair 8-4-22. GPS GPS is not working Enable GPS Function in the setting. Check GPS function ON Check the Antenna connect 1. Resolder or Replace ANT801 2. Replace REAR Y es Check solder condition at resolder C813,C874,L803,L806,L816 Check 26MHz Clock at Check OSC802,C871,C872 (short, open, crack, etc.) OSC802 Check PMIC(U600) &...
Page 75
Level 3 Repair 8-3-23. NFC NFC is not working Check the Battery Check the battery (antenna/contact crack, open, damaged) (NFC Antenna is in Battery) Check the Voltage on NFC_EN, NFC_IRQ Check the TP839, TP842 goes high Check 26.00MHz Clock which Check the OSC801(crack, open, etc.) is OSC801 with C868 Resolder or Replace U800...
Page 77
Level 3 Repair 8-3-24.Sensor Part 1. Barcode emulator Abnorma Barcode Part Check the Voltage VCC_1.8V_AP,VCC_2.8V_AP Resolder U600 or U1001, or U1002 C1007 = 3,3V Check the Voltage R1002 = 1.8V Resolder U1001 or heat over UCP5000 R1003 = 1.8V check the voltage when Resolder U1001 or heat over UCP5000 barcode active mode or Q702 or resolder R747,748,749,750...
Page 79
Level 3 Repair 2. IR LED Abnorma IRLED Part Check the Voltage VCC_1.8V_AP,VCC_2.8V_AP Resolder U600 or U1001 C756 = 3.4V Check the Voltage R1002 = 1.8V Resolder U1001 or heat over UCP5000 R1003 = 1.8V check the voltage when Resolder U1001 or heat over UCP5000 barcode active mode or Q701 or resolder R1046 = 1.8V...
Page 85
Level 3 Repair 5. Sensor HUB part Abnormal Sensor HUB part 1. all sensors not working or 2. gesture/6 axis/magnetic/barometer not working or 3. RGB / Humidity & Temperature not working Check the Voltage Resolder U600 or U805 C824 or C825 or C822 = 1.8V Check the Voltage Resolder U805 R818 = 1.8V...
Page 87
Level 3 Repair 6. Magnetic Sensor Abnormal Magnetic Sensor part Check the Voltage C853 = 2.8V Resolder U806 or heat over U600 C852 = 1.8V Check the Voltage R819 = 1.8V Resolder U805 or R819 or R820 R820 = 1.8V Magnetic Sensor operate Replace U806 or U805 using a Heatgun correctly?
Page 89
Level 3 Repair 7. Barometer Sensor Abnormal Barometer Sensor part Check the Voltage C856 = 1.8V Resolder U804 or heat over U600 C855 = 1.8V Check the Voltage R819 = 1.8V Resolder U805 or R819 or R820 R820 = 1.8V Barometer Sensor operate Replace U805 or U804 using a Heatgun correctly?
Page 91
Level 3 Repair 8. TEMP/Humidity sensor Abnormal Temp/Humi Sensor part Reconnect SUB PBA and main PBA or Check the Voltage VCC_1.8V_AP = 1.8V resolider U600 Check the Voltage R822 = 1.8V Resolder U805 or heat over U600 R823 = 1.8V Temp/Humi Sensor operate Change SUB PBA correctly?
Page 93
Level 3 Repair ※ CAUTION Temperature/Humidity sensor should not be directly exposed to the heat-gun when you replace USB connector, because excessive heat can cause abnormal operation of the sensor. The temperature that Temperature/Humidity sensor sees should not exceed 260°C. Use proper heat- shielding material to protect Temperature/Humidity sensor.
Page 94
Level 3 Repair 9. Acceleration , Gyro Sensor Abnormal Acceleration,Gyro Sensor part Check the Voltage C840 = 2.8V Resolder U807 or heat over U600 C841 = 2.8V C837 = 1.8V Check the Voltage R819 = 1.8V Resolder U805 or R819 or R820 R820 = 1.8V Apply Heat over or Replace U807 Acceleration,Gyro Sensor...
Page 96
Level 3 Repair 8-3-25. LCD LCD is still off after PWR ON Check the connection of Reconnect the HEA 700 HEA 700 Check VCC_3.0V_LCD = Resolder or Replace the PMIC(U600) 3.0V(C642) Check VCC_1.8V_LCD = Resolder or Replace the PMIC(U600) 1.8V(C707) Check ELVDD_4.6V = Resoldering L707, L712 4.6V(C751), ELVSS_-4.4V = -...
Page 99
Level 3 Repair 8-3-26. TSP Touch Screen does not work Check TSP Connector on Reconnect the HEA700 Main PBA Check the TSP connector on Reconnect TSP Connector LCD Module U600 TSP_VDD_1.8V(R741) and Resolder or Replace U600 TSP_AVDD_3.3V(C709) Check the I2C signal(R5025, Resolder R5025, R5026, R741 R5026) and int signal(R741) Replace LCD Module...
Page 101
Level 3 Repair 8-3-27. 13M CAM "Camera" function does not work Reconnect the 13M Cam module on Check the Camera connector on Main PBA HDC701 Check the voltage Replace U702 C711 = 2.8V Check the voltage C710 = 2.8V Replace U600 C712 = 1.8V C713 = 1.2V Check the L700...
Page 102
Level 3 Repair 8-3-28. 2M CAM "Camera" function does not work Reconnect the 13M Cam module on Check the Camera connector on Main PBA HDC700 Check the voltage Replace U702 C715 = 2.8V Check the voltage Replace U600 C634 = 1.8V Check the L701,L706 Replace L701, L706 (Crack, Open, Etc)