Zte ZXHN H196A User Manual page 8

Rear panel
Figure 3-2 shows the interfaces and buttons on the rear panel of the ZXHN
H196A.
Figure 3-2 The Rear Panel
Interface/Button
POWER
WAN
LAN1/LAN2
RESET
WPS
• *The WPS button is located in the front of the device, but there is no mark.
Function
Power supply port, it is connected to the power
adapter.
RJ-45 port, it is used to to connect to the uplink
access network.
RJ-45 port, it is used to connect the modem to
computer , STB or other network devices.
During power ON period, hold on this button for more
than 5 seconds to reset the current settings to the
factory default setting, and then the system restarts
automatically.
WPS Push Button, press this button to enable or
disable the WPS function.