Advertisement
Available languages
Available languages
Features
Rear Panel
1. Media Panel Buttons: Controls for the
USB/SD, FM radio, and Bluetooth
sources. These controls include mode
selection and music playback options. See
Media Panel
2. USB Port: Connect your USB flash drive
here to play music. You can also use this
port for charging the USB device, such as a
tablet or smartphone. To charge a device
that is streaming music via Bluetooth,
pause the music first and then wait for it to
reconnect
after
included) is inserted.
3. SD Card Slot: Insert your SD card here to
play music.
4. Display: This screen shows information
relevant
to
operation.
Note: The Display comes with a plastic
protector on it. Remove this for optimal
viewing.
5. Mic Inputs (1/4"/6.35 mm & XLR): Connect
a microphone or mic-level source to these
inputs.
6. Aux Inputs (1/8" & XLR): These inputs can
be used to connect a CD player, MP3
player, or other audio source.
7. Mix Out (XLR): Connect this output to a
speaker, mixer, or recorder.
8. Control Knob: Turn this knob to adjust the
main
volume
loudspeaker. Push this knob to select and
make adjustments to the mic 1 volume, the
mic 2 volume, source volume (radio, USB,
SD, Bluetooth signal, and aux input), echo
effect, high EQ, and low EQ. The volume of
™
Total PA
Live does not affect your
Bluetooth device volume. For the best
sound quality, set your input source volume
to 100% and use the Source and Main
Volume control of the speaker to adjust the
volume.
9. Repeat/Link: In USB or SD mode, press this button to repeat a single track, folder, or
all tracks. Press and hold this button to start stereo linking to another Total PA
10. Mode: Press this button to select the audio source to use: USB, SD, FM radio, Aux
(available to select when the USB port and SD card slot are empty), or Bluetooth.
for more information.
the
USB
™
Total
PA
Live's
(overall
output)
®
audio
cable
(not
current
of
the
1 4
1 2
8
1 1
1 5
MIC IN 1
MIC IN 2
14
1 3
9
10
12
11
1 6
1 7
XLR IN
MIX OUT
13
™
Live.
5
Advertisement
