Designed, Manufactured and Supported in the USA
VIKING
SECURITY & COMMUNICATION
Vandal Resistant
Hot-Line Panel Phones
The K-1900-7 Series panel phones will auto-dial a 1-32 digit programmable phone number
each time the handset is lifted. The unit will touch tone or pulse dial and will not auto-dial
on incoming calls.
The K-1900-7 Series housing consists of a heavy gauge stainless steel panel, an armored
cable, a heavy duty handset, and an all metal cradle. The K-1900-7 Series phone can be
easily touch tone programmed at the shop or installation site. All programming is stored in
non-volatile memory.
The K-1900-712L and K-1900-712L-EWP feature a 12" long armored cable with an internal
stainless steel lanyard for additional cable strength.
The K-1900-7-EWP and K-1900-712L-EWP share all of the features of the K-1900-7 and
K-1900-712L in addition to Enhanced Weather Protection (EWP) for outdoor installations
where the unit is exposed to precipitation or condensation. EWP products are designed to
meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled
butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim
pots and DIP switches for easy on-site programming. For more info on EWP, see DOD 859.
Note: If a ringer is required, use an external unit such as the Viking SR-1 (DOD 477), or LPR-1 (DOD 550).
Features
• Vandal Resistant Features: 12 gauge (0.105" thick) 316 stainless steel panel
with permanent laser etched graphics, armored cable, metal cradle and hex
drive mounting screws
• Weather Resistant Features: Marine grade 316 stainless steel faceplate and
screws
• Auto dials one programmable speed dial number (up to 32 digits)
• Touch tone or pulse dialing
• Non-volatile memory (no batteries required)
• Operates on analog PABX and key system extensions or Centrex and CO lines
• Programmable 6 digit security code
• Touch tone programmable
• Optional Enhanced Weather Protection (EWP) available - EWP products are
designed to meet IP66 Ingress Protection Rating, see DOD 859
• 12" armored handset cord on K-1900-712L and K-1900-712L-EWP
• 36" armored handset cord on K-1900-7
• 54" armored handset cord on K-1900-7-EWP
• Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers
• Hearing aid compatible amplified handset with sealed push button volume
control
• Programmable default volume level
• Programmable volume control disable
• Flush mount using a standard double-gang box (not included)
• Surface mount using an optional VE-5x10 surface mount box (not included, see
DOD 424)
PRODUCT
MANUAL
• Catalog sales
• Kiosks
• Courtesy phones
• Automated tellers (ATM's)
• Customer service phones
Power: Telephone line powered (20V DC/18mA minimum)
Dimensions for Standard Model:
Dimensions for EWP Model:
Shipping Weight: 4 lbs (1.8 kg )
Operating Temperature: -30°F to 140°F (-34°C to 60°C)
Humidity - Standard Model: 5% to 95% non-condensing
Humidity - EWP Model : Up to 100% condensing
K-1900-712L(EWP) Handset Cable Length: 12" to 12.7" (31 cm to 33 cm)
K-1900-7 Handset Cable Length: 34" to 37" (86 cm to 94 cm)
K-1900-7-EWP Handset Cable Length: 52" to 57" (132 cm to 145 cm)
Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
Connections: (2) gel-filled butt connectors
K-1900-7 Series
Hot-Line Panel Phone
K-1900-712L or
K-1900-712L-EWP
with 12" armored
cable and lanyard
K-1900-7
with 36"
armored cable
Applications
• Hot-line reservation phones
• Security and emergency phones
• Replaces leased ringdown circuits
• Gate/entrance communication in noisy
areas (diesel trucks, factory noise, etc.)
Specifications
Phone: 5.0" x 10.0" x 5.1" (127mm x 254mm x 130mm)
With rough-in box: 5.0" x 10.0" x 5.2" (127mm x 254mm x 132mm)
Phone: 5.0" x 10.0" x 5.18" (127mm x 254mm x 132mm)
With rough-in box: 5.0" x 10.0" x 5.28" (127mm x 254mm x 134mm)
June 19, 2020
K-1900-7-EWP
with 54"
armored cable