The VC hydronic valve consists of a valve body and replaceable characterized
cartridge assembly.
Depending on the valve model selected, they can be used with a VC2114 or
VC8114 series actuator to provide on-off flow control, or with a VC6930 or
VC7930 series actuator to provide proportional flow control. Two way bodies
may be plumbed in either direction. Three-way bodies may be used in either
diverting or mixing applications.
Replacing the cartridge rebuilds the valve. The valve body should be able to
stay in the pipes indefinitely.
VC actuators, ordered separately, use cam-operated cartridge travel to resist
water hammer. Limit switches prevent motor overrun. These actuators are
available with conformal coated printed circuit boards for humidity resistance.
The specifications following are nominal and conform to generally
accepted industry standards. Honeywell is not responsible for damages
resulting from misapplication or misuse of its products.
Operating Ambient:
32 to 150°F [0 to +65°C].
5-95% RH (non-condensing)
Fluid temperatures:
34 to 203°F [1 to 95°C]
Shipping and Storage Temperature:
-40 to 150°F [-40 to +65°C]
Atmosphere:
Non-corrosive, non-explosive.
Valve Materials:
Body of bronze Cartridge of Ryton (polyphenylene sulphide) and
Noryl (polyphenylene oxide)
O-ring seals of EPDM rubber
Stem of stainless steel
Pressure Rating:
Static - 300 psig [20 Bar] maximum.
Burst - 1500 psig [100 Bar]
Operating Differential and Close-off - 60 psi maximum [4 bar]
Stem Travel:
0.4 inches [10 mm]
Flow Characteristics: Linear or equal percentage, per Table 1.
Accessories and Replacement Parts:
40007029-002: Wrench for removing VC cartridge
VCZZ1100: 2-way linear flow characteristic cartridge
VCZZ1400: 2-way equal percentage cartridge
VCZZ1500: 2-way equal percentage cartridge, very low Cv
VCZZ1600: 2-way equal percentage cartridge, low Cv
VCZZ6100: 3-way linear flow characteristic cartridge
272866B: Flush caps for system cleaning, 10 per pack
2003.02.24
© Honeywell Limited.
Cartridge Valve for Use with VC Series Actuators
SPECIFICATIONS
VCA,B,M, and N Series
68 [2-3/4]
68 [2-3/4]
94 [3-3/4]
94 [3-3/4]
D D
A
C
Figure 1 - Nominal dimensions in inches and millimetres
[4]
Dimension
mm Inches mm Inches mm Inches
Pipe Fitting Sizes
1/2" BSPP (int.) [2]
98
1/2" BSPT (int.)
3/4" BSPP (int.)
3/4" BSPT (int.)
94 3-11/16
3/4" BSPP (ext.)
112 4-7/16
22mm Compression [3]
94 3-11/16
1" BSPP (int.)
1" BSPP (ext.)
95 3-11/17 114 4-7/17 137 5-11/33
1" BSPT (int.)
94 3-11/16
28mm Compression [3]
116 4-9/16
NORTH AMERICA STANDARD MODELS
3/8" FLARE [1]
98
1/2" SWEAT
89
1/2" FLARE [1]
1/2" INVERTED FLARE [1]
98
1/2" NPT (int.)
3/4" NPT (int.)
3/4" SWEAT
94 3-11/16
1" NPT (int.)
1" SWEAT
1-1/4" SWEAT
110 4-5/16 118 4-5/8 142
1-1/4" NPT (int.)
[1] No adapter
[2] 15 mm compression
[3] Nuts and olives not included
[4] All models not available in all countries
Table 1: VC Valve assembled dimensions
94 [3-3/4]
94 [3-3/4]
90 [3-9/16]
90 [3-9/16]
A
B
B
AB
C
C
D
E
3-7/8
111 4-3/8
136 5-11/32
130
5-1/8
113 4-7/16
140
5-1/2
136 5-11/32
136 5-11/32
113 4-7/16
147 5-13/16
3-7/8
136 5-11/32
3-1/2
130
5-1/8
111 4-3/8
3-7/8
136
5-11/32
130
5-1/8
132 5-3/16
113 4-7/16
136
5-11/32
5-5/8
Form No. 95C-10919
E E