Specifications; Application; Overview; Structure - Fujitsu FTP-639MCL354 Product Specification

3.

Specifications

3-1

Application

This specification is applies to FTP-639MCL354.
Standards by this specification are satisfied by standard interface .
3-2

Overview

This printer is the small and lightweight printer which build in a line dot thermal head of resolution 8
dots /mm..
The auto cutter is carried in this printer. These specifications should presuppose that it is main with
the specification of a printer part, and refer to the following product specifications for the
specification of an auto cutter.
FTP-639CT001
3-3

Structure

Below is the figure of this printer's structure (the mechanical part).
Flexible cable for head Flexible cable for motor & sensor
Platen Release switch Motor
Deceleration
gear
Thermal head
Platen unit
Date Design Inspection
Rev.
Design
Auto cutter specification
Photo sensor (paper detect sensor)
Changes made
Inspect.
Auto cutter
Cutter frame
Printer
FTP-639MCL354 SPECIFICATION
A1NA02273-0354
FUJITSU COMPONENT LIMITED
Approv.
Submit to
8
26