Table of Contents
Advertisement
Getting Started
Operating Your Radio
Getting Started
Refer to the foldout on the front cover of this manual to identify the various
controls and indicators on your radio.
Throughout this manual you will be instructed to press or to press and hold
buttons on the transceiver or on the microphone. Press means a momentary
press, then release; press and hold means to hold the button down for three (3)
seconds or more.
Tones And Alarms
When your CobraMarine
™
VHF radio is On, you can expect to hear the following
tones and alarms. The volume of these sounds is controlled by the circuitry in the
radio and is not affected by the volume set with the On-Off Power/Volume knob.
Confirmation Tone
Single high-pitched beep confirms all button presses except the Talk button.
It can be turned On or Off. See set-up routines on page 40.
Error Tone
Single low-pitched beep indicates an invalid button press.
DSC Distress Alarm
Loud, continuous, low-pitched series of closely spaced, three (3)
beep groups. Press any button to turn it Off. This alarm sounds for:
Distress call send, receive, and acknowledgement
Distress relay call received
All ships call received
NOTE
This alarm sounds only for DSC distress calls on Channel 70.
It does not sound for voice calls on Channel 16 — you still
must listen for those.
34 English
Operating Your Radio
DSC Geographical Alarm
•
Loud, continuous, medium-pitched, high-low tones (warble) —
sounds when a geographical call is received. Press any button to turn it Off.
DSC Position Request Alarm
Medium-loud, continuous, low-pitched series of closely spaced, four (4) beeps
[three (3) short – one (1) long] groups — sounds when a position request call
is received. Press any button to turn it Off.
DSC Individual Alarm
Medium-loud, continuous, medium-pitched, two (2) beep groups —
sounds when an individual call is received. Press any button to turn it Off.
Weather Alarm
Medium-loud, continuous, medium-pitched series of one-half (
spaced one-half (
and NOAA sends a 1050 Hz weather alert tone on the selected weather channel.
Press any button to turn it Off.
Power On-Off
Transceiver power can be turned On or Off by the On-Off Power/Volume
knob on the transceiver.
On-Off Power/
Volume Knob
Getting Started
1
⁄
) second apart — sounds when weather alert is turned On
2
To Turn Your Radio On Or Off:
1. Turn the On-Off Power/Volume knob on the
transceiver until you hear and feel a click.
When the radio is powered On, the confirmation tone
will sound.
The radio will return to the settings in effect when it was
last powered Off, the LCD will show the corresponding
information, and all controls will be operative. The radio
will then be in Standby mode.
Nothing comes close to a Cobra
1
⁄
) second beeps
2
®
35
Advertisement
Table of Contents
