Audio Alerts; Visual Display; Signals Detected - Cobra XRS 9600 Operating Instructions Manual

Detection
Your Detector
Detection

Signals Detected

The tables on the following pages show you the types of Signals your
detector will detect, as well as the visual alerts it provides for each of them.

Audio Alerts

A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K and Ka band
radar signals, the tones will repeat faster as you approach the signal
source. The repeat rate of the tones gives you useful information about
the signal detected. See responding to alerts on page 27.

Visual Display

An indication of the type of signal detected will appear in the DigiView Data
Display. During X, K and Ka alerts, you will also see from one (1) to five (5)
vertical bars, indicating the strength of the signal detected.
Signal Strength Chart
Signal Strength = 1
(Weakest Signal) Signal Strength = 2
1
-
- - -
Signal Strength = 5
Signal Strength = 4 (Strongest Signal)
- _
-
- - -
- - 4 - - - - _ - - -
- - - - -
- - - - - - -
- - - -
24 English
Signal Strength = 3
2 - - 3
- -
- - -
5
Detection
Your Detector
Radar Signals And Visual Displays
•
X Signal Detected
X
-
- -
Laser Signals And Visual Displays
LTI 20-20
Laser
2 0 / 2 0
Type of Signal Visual Display
X Band Radar X and Signal Strength
K Band Radar K and Signal Strength
Ka Band Radar Ka and Signal Strength
Pop Radar Mode Pop
K Signal Detected Ka Signal Detected
- _
-
- -
2 K - 3 K a - - - - _ - - - 5
- - - -
- - - - - -
- - -
Type of Signal Visual Display
LTI 20-20* Laser 20/20
LTI Ultra-Lyte* Laser UltraLyte
Kustom Signals ProLaser* Laser Pro Laser
Kustom Signals ProLaser III* Laser Pro Laser 3
* Your detector provides 360˚ detection of these signals.
Kustom Signals
LTI Ultra-Lyte ProLaser
Laser
Laser
Pro Laser
UltraLyte
NOTE
Beep rate changes with different laser alerts.
Nothing comes close to a Cobra
Pop Signal Detected
Pop
Kustom Signals
ProLaser III
Laser
Pro Laser 3
® 25