Spectre 1 Audio Mode; Safety Alert; Detection; Signals Detected - Cobra XRS 9940 Operating Instructions Manual

Spectre 1 Audio Mode
When Spectre 1 Audio mode is on, alerts will be sounded as well as being
displayed on the screen. This setting is only available if Spectre 1 Alert is on.
The factory setting is Spectre 1 Audio off.
Safety Alert
When Safety Alert mode is on, Safety Alert radar signals will be detected and
an alert will be given. During the alert, the unit will continue to detect other
signals. The factory setting is Safety Alert on.
Detection
•
Signals Detected
The tables on the following pages show the types of Signals your
detector will detect, as well as the visual alerts it provides for
each of them.
Audio Alerts
A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
radar signals, the tones will repeat faster as you approach the signal
source. The repeat rate of the tones gives you useful information about
the signal detected. See responding to alerts on page 25.
Visual Display
An indication of the type of signal detected will appear in the OLEO Data
Display. During X, K, Ka and Ku alerts, you will also see the numbers from
one to five, indicating the strength of the signal detected.
Nothing
Comes Close to a Cobra®
~