Removing & Installing Body Components; Battery - Honda CTX700D 2018 Owner's Manual

Removing & Installing Body Components

Battery

Negative
terminal
Rubber strap
# Removal
Make sure the ignition switch is in the OFF
position.
66
1.
2.
3.
Positive
terminal
4.
5.
#
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
Battery
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
Remove the seat.
2
Unhook the rubber strap.
Disconnect the negative - terminal from
the battery.
Disconnect the positive + terminal from
the battery.
Remove the battery taking care not to
drop the terminal nuts.
Installation
2
P. 69
P. 25
2
P. 54
2
P. 110