6. Fill the gear case with the recommended oil.
2.7 US oz (80 cm
7. Remove the oil level check bolt (4) and sealing washer. Make sure
the oil level reaches the oil level check hole (5).
8. Install the oil level check bolt with a new sealing washer and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
9. Install the oil fill cap and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
REAR
(5)
(3)
(4)
(1) oil drain plug
(2) oil fill cap
(3) sealing washer
3
)
(2)
(4) oil level check bolt
(5) oil level check hole
Gear Case Oil
(1)
Servicing Your Honda
(3)
101