Cobra microTALK LI5600-2DXVP Owner's Manual page 8

10289_LI5600DX_PH2 8/10/07 11:28 AM
Main Icons
Main Icons
Mode Functions
Operation
Intro Operation Customer Warranty
Intro Operation Customer Warranty
Assistance
Set CTCSS Privacy Codes
Assistance
To select a CTCSS privacy code:
Mode Button
1. After selecting a channel, press the
Mode button until the CTCSS icon appears
Secondary Icons
and the small numbers flash on the display
(01 through 38).
Secondary Icons
CTCSS Privacy Code
NOTE
If DCS is turned on at the channel
selected, the display will flash the
Notice
CTCSS icon and "OFF." To switch from
Channel Buttons
DCS to CTCSS, press the Channel Up
Notice
or Channel Down button while the
display is flashing "OFF." The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.
2. Press using the Channel Up or Channel
Down button to select a CTCSS privacy
code. You can hold the Up or Down
button for fast advance.
3. When your desired CTCSS privacy code is
displayed, choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
10
Page 10
Main Icons
Main Icons
Introduction Operation
Intro Operation
Intro Operation
Set DCS Privacy Codes
•
To select a DCS privacy code:
Mode Button
1. After selecting a channel, press the Mode
button until the DCS icon appears and the
Secondary Icons
small numbers flash on the display
(01 through 104).
Secondary Icons
DCS Privacy Code
NOTE
If CTCSS is turned on at the channel
selected, the display will flash the
Notice
DCS icon and "OFF." To switch from
Channel Buttons
CTCSS to DCS, press the Channel Up
or Channel Down button while the
display is flashing "OFF." The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.
2. Press using the Channel Up or Channel Down
button to select a DCS privacy code. You can
hold the Up or Down button for fast advance.
3. When your desired DCS privacy code is
displayed, choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
Customer Assistance Warranty
Customer Warranty
Customer Warranty
Assistance
Assistance
•
Notice
Nothing Comes Close to a Cobra ® 11