TP-Link TL-WPA4220 Quick Installation Manual page 2

Unify Wi-Fi Networks via Wi-Fi Auto-Sync
Wi-Fi Auto-Sync enables you to easily create one unified Wi-Fi network throughout your home.
Copy SSID and Password from Your Router via WPS
Note: If your router doesn't have a WPS button, manually change the extender's Wi-Fi
settings via the tpPLC app, tpPLC Utility, or web interface.
1. Plug in the extender in the same room as your router. Wait until the
extender's Wi-Fi LED turns on.
2. Press your router's WPS button. Within 2 minutes, press the
extender's Wi-Fi button for 1 second. The extender's Wi-Fi LED
starts blinking. When it stays on, Wi-Fi settings are copied.
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender's
Wi-Fi settings.
WPS
Within 2 minutes
WAN WPS LAN
Wireless Router Extender
3. Relocate the extender and enjoy the internet using your router's
SSID and password.
SAME
SSID & Password
Personalize Your Network
tpPLC App
For easy management via your smartphone or tablet, download the app from the
App Store or Google Play, or simply scan the QR code.
Scan to download tpPLC App
tpPLC Utility
For easy management via your computer, download the utility on the product's
Support page at https://www.tp-link.com/support/download/
Note: For detailed instructions, refer to the utility manual on the product's Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit
http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the product's Support page.
Auto-Sync Settings to More Extenders via Wi-Fi Move
If you have paired your powerline devices, the Wi-Fi settings will
automatically sync from the existing extender to the new one.
Note: For more extender models that support Wi-Fi Auto-Sync, visit http://www.tp-link.com.
Network C
Blinking
Network B
On
DIFFERENT
SSIDs & Passwords
Wi-Fi Button
Network A
If you personalize any extender with LED schedules or other Wi-Fi settings
(such as Wi-Fi schedules and guest network), the settings will also
automatically sync to other extenders in the secured powerline network.
Frequently Asked Questions
Q1. How do I reset my extender to factory default settings?
A. With the extender plugged into an electrical outlet, press and hold the Reset button for at least 2
seconds. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is
complete.
Q2. What should I do if the Powerline LED
A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.
A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline network?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices
again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
Q4. What should I do if a successfully-paired extender does not reconnect after it is
relocated?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Try to pair the extender again, and make sure the Powerline LED
Physical Appearance
LED
Network A
Network A
SAME
Auto-Sync
SSID & Password
Network A
ITEM
Pair Button
Wi-Fi Button
Reset Button
A3. Check for possible interference due to a washing machine, air conditioner or other household
is off?
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Safety Information
Please read and follow the above safety information when operating the device. We cannot guarantee
that no accidents or damage will occur due to improper use of the device. Please use this product with
is on.
care and operate at your own risk.
Power LED
Wi-Fi LED
Wi-Fi Button
Pair Button
Pair
Reset
Reset
Ethernet Ports
STATUS DESCRIPTION
On The powerline extender is on.
Blinking
Pairing is in process.
Power
Off The powerline extender is off.
On The powerline extender is connected to a powerline network.
Powerline
Off The powerline extender is not connected to any powerline network.
Ethernet On/Off The Ethernet port is connected or not connected.
On The wireless function is enabled.
Slowly: The powerline extender is cloning 2.4GHz wireless network settings
from the main router.
Wi-Fi Blinking
Quickly: The powerline extender is syncing 2.4GHz wireless network
settings.
Off
The wireless function is disabled.
DESCRIPTION
Press and hold for 1 second to set up or join a secure powerline network.
Press for 1 second to start copying Wi-Fi settings from the router.
Press and hold for about 5 seconds to turn Wi-Fi on or off.
Press and hold the Pair button for at least 2 seconds, then release the button to reset the
extender to default settings.
appliances that may be too close to one of the powerline devices. Plug the appliance into the
integrated electrical socket to remove the electrical noise if your powerline device has an
integrated electrical socket.
For technical support, replacement services, user guides, and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link Community at
https://community.tp-link.com.
If you have any suggestions or needs for our product guides, you are welcome to email
techwriter@tp-link.com.cn.
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Plug the powerline devices directly into the wall outlets but not the power strips.
The original