Kyocera FS-1800 Manual page 2

5. Take the new toner
container from its bag.
With the label side down,
thoroughly shake the
container (in the direction
of the arrow) ten or more
times to loosen and mix
the toner inside.
6. Carefully pull the sealing
strip off the toner
container keeping it as
level as possible to avoid
toner spillage.
7. Lower the toner container into the printer.
8. When it is installed
correctly, firmly push the
top of the toner container
at the 'push here' points
until it locks into position.
9. Close the top cover.
10. If the printer had previously displayed the message 'Replace Toner
Clean Printer' before you changed the toner, it will display 'Clean
printer Press CONTINUE' afterwards. After cleaning the printer -
press the 'continue' key.
11. When replacing the toner container, you should also replace the
waste toner bottle.
12. Open the printer side
cover.