Dell Alienware m15 R6 Service Manual page 80

Table 8. System setup options—Connection menu (continued)
Connection
HTTP(s) Boot Modes
Table 9. System setup options—Power menu
Power
Battery 1 Charge Mode
Battery 1 Charge Mode
Advanced Configuration
Enable Advanced Battery Charge
Configuration
USB PowerShare
Enable USB PowerShare
Thermal Management
Thermal Management
Block Sleep
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Intel Speed Shift Technology
Intel Speed Shift Technology
80
Configures HTTP(s) Boot Modes.
Default: Auto Mode. HTTP(s) Boot automatically extracts Boot URL from the
Dynamic Host Configuration (DHCP).
NOTE: Provisioning of the Certificate is required to connect to HTTPs Boot
server.
Enables the computer to run on battery during peak power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your typical
battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. Advanced Battery Charged maximizes battery health
while still supporting heavy use during the work day.
Default: OFF
Enables external devices such as phones and portable music players to be
powered or charged using the stored system battery..
Default: OFF
Enables the cooling fan and processor heat management to adjust system
performance, noise, and temperature.
Default: Optimized. Standard settings for cooling fan and processor heat
management. This setting is a balance of performance, noise, and temperature.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel® Rapid Start will be
disabled automatically, and the operating system power option will be blank if
it was set to Sleep.
Enable or disable the lid switch.
Default: ON
Enables the computer to turn on from the off state whenever the lid is opened.
Default: ON
Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate processor
performance automatically.
Default: ON