Clover HDC560 Install Manual

INSTALLATION
1. Attach the mounting bracket base ring①to
213mm
the wall or ceiling, wherever you want to
111mm
install the camera. Locate a wall stud or
3
ceiling joist and secure the bracket base ring
using the supplied screws. Attach the mount-
4
ing bracket② to the base ring① and secure
5
them using the supplied screws.
CELING-MOUNT
2. Lock the mounting bracket with the locking
ring③.
234mm
3. Turn the pivot locking screw④ with the
111mm
provided hex-head wrench counterclockwise
to set the desired angle of camera toward
objects and turn it clockwise to secure. It can
be used for wall-mount or ceiling-mount
5 4 3
application depending on setting this pivot
WALL-MOUNT
locking screw.
4. Loosen the locking screw⑤ with the pro-
vided hex-head wrench and turn the camera
Base Ring
1
clockwise or counter-clockwise to upright
images on the screen and turn it clockwise to
Screw
secure.
Bracket
2
5. Connect the one end of 100' cable
(supplied) to the Din jack of 5' cable attached
to the camera. Make sure that two arrows on
the top of them should be aimed at each
other. Connect the other end (BNC or RCA)
Case
of cable to the video devices such as DVR,
monitor/TV. Plug the provided AC adapter to
the DC jack (red) of the end of 100' cable.