Graco A Series Instructions-Parts List Manual page 6

Fig. 10. Install ball (206) in piston rod. If Loctiter is ap-
plied to piston valve threads, ensure that none gets on
ball.
206
Fig. 10
Fig. 11. Tighten piston valve to piston rod as specified:
Torque to 27 +/–3 ft-lb
(244197)
Torque to 55 +/–3 ft-lb
(244224, 244201,
244409, 245902, 245904)
Torque to 55 +/–3 ft-lb
(244954)
Torque to 55 +/–3 ft-lb
(244957, 246257, 245889)
Fig. 11
6 309277
Service
Fig. 12. Soak all leather packings in SAE 30W oil for 1
hour minimum prior to assembly. Place male gland
(204) in cylinder. Alternately stack UHMWPE (203) and
leather packings (223) (note orientation). Place female
gland (224) in top of cylinder. Seat packings.
7575A
Fig. 12
Fig. 13. Install seal (201) into packing nut (202). Install
throat adjustment spacer (228) onto packing nut.
Loosely install packing nut into cylinder.
(228 o-ring
on 246257)
7576A
Fig. 13
224
223
203
204
201
202
228
ti2333a
Not
used on
244197
7573B
7581A