Yamaha F13.5B Owner's Manual page 39

3. Place the throttle grip in the "
(start) position. After the engine starts,
return the throttle to the fully closed po-
sition.
4. Push the starter button to start the en-
gine.
5. Immediately after the engine starts, re-
lease the starter button and allow it to re-
turn to its original position.
ECM00160
CAUTION:
Never push the starter button while the
G
engine is running.
Do not keep the starter motor turning
G
for more than 5 seconds. If the starter
motor is turned continuously for more
than 5 seconds, the battery will be
ZMU02026
quickly discharged, thus making it im-
possible to start the engine. The starter
"
can also be damaged. If the engine will
not start after 5 seconds of cranking,
release the starter button, wait 10 sec-
onds, then crank the engine again.
NOTE:
When the engine is cold, it needs to be
G
warmed up. For further information, see
page 35.
If the engine is warm and fails to start,
G
open the throttle slightly and try to start the
engine again. If the engine still fails to
start, see page 74.
ZMU05600
6. Slowly return the throttle grip to the fully
closed position.
EMU27663
Electric start and remote control models
1. Place the remote control lever in neutral.
ZMU05538
NOTE:
The start-in-gear protection device prevents
Operation
33