NOTE:
The device does not support elevation angle adjustment. It only supports
horizontal 180° adjustment.
3.
The signal strength at the current position is displayed (Perfect, Great, Good,
Poor and Terrible). You can touch view details to view the network details.
When the device signal is detected, your phone automatically beeps. The
louder the sound and the stronger the vibration, the better the signal strength.
NOTE:
Touch FINISH to end the detection and select whether to save the current
position if needed.
4.
Continue the detection until the desired position is detected, and save or
continue to adjust the position as prompted.
Powering off the MC7010
After the installation position is determined, disconnect the POE adapter from the
device.
Installing Your Device
Installing the Device on a Wall
1.
Mark the positions for drilling holes on the wall.
9