Advertisement
2.
Installing Running Gear/Cylinder Rack
Tools Needed:
5/16, 9/16 in.
OM-207 132 Page 2
2
3
9/16 in.
1
1
Handles
Remove the two lag bolts that are
holding the handles in place.
Install handles with the rubber grips
pointing downward and outward as
shown using supplied 3/8−16 nuts
and bolts.
2
Cylinder Chain
Install the center clip of the cylinder
chain to the center hole of the bottle
mounting bracket as shown.
.
The bottle mounting bracket
can be moved to the middle
shelf to accommodate two
small bottles or one small and
one large bottle.
3
Lag Bolts
Remove the remaining lag bolts
from the skid, slide the cart forward,
remove front skid support. Roll cart
off skid.
.
The power source may or may
not be already mounted in the
Mig Runner Cart
803 117-B
Advertisement
