Safety Instructions; Scope Of Supply; Delivery Condition; Accessories - Bosch Rexroth FMS Instructions Manual

6/30 Bosch Rexroth AG
1.3.3 Abbreviations
The following abbreviations are used in this documentation:
Tabelle 4: Abbreviations and definitions
Abbreviation Meaning
FMS Function modules with Ball Rail System and Ball Screw Assembly
FMB Function module with Ball Rail System and belt drive
BASA Ball Screw Assembly
LSS Initial lubrication done at the factory
d (mm) Nominal diameter of Ball Screw Assembly
o
P (mm) Lead of Ball Screw Assembly
C (N) Dynamic load capacity of guideway or Ball Screw Assembly
F (N) Dynamic equivalent load
m
F /C (-) Load ratio
m
2

Safety instructions

The general safety instructions for this product can be found in the documentation "Safety instructions for Linear
Motion Systems". You must have read and understood these before handling the product.
3

Scope of supply

The scope of supply includes: Function module, drive (motor and gear unit, installed) if ordered together.
3.1

Delivery condition

Depending on the order, completely assembled with drive.
3.2

Accessories

Available accessories: ! Catalog.
Dimensions and part numbers of the accessories as well as additional mounting accessories ! catalog.
3.3

Overview of function modules

2.1 Overview of types
The function modules are available in different sizes and shapes. Specific data and dimensions ! catalog.
FMx A
(mm)
-080 80
-110
110
Fig. 1: Overview of function modules
H
(mm)
107
89
Function modules | R320103174/2018-08
L
A