Table of Contents
Advertisement
■ If the thread breaks during sewing
a
Press the "Start/Stop" button to stop the machine.
b
If the upper thread is broken, redo the upper
threading. If the bobbin thread is broken, press
and follow the directions in steps
the previous section to reset the bobbin.
c
Press
.
d
Press
,
, or
correct number of stitches before the area where the
thread broke.
Memo
• If you cannot move back to the area where the
thread broke, press
move to the beginning position of that color, then
use
,
or
before where the thread broke.
e
Press
to return to the original screen.
f
Press
(Presser foot lifter button) to lower the
presser foot, and press the "Start/Stop" button to
continue sewing.
■ Resuming embroidery after turning off the
power
The current color and stitch number are saved when
embroidery is stopped. The next time the machine is
turned on, you have the option to continue or delete the
pattern.
a
f
through
from
to move the needle back the
to select the color and
to move ahead to slightly
Embroidery foot auto down
You can choose a setting to automatically lower the
embroidery foot at the beginning of embroidering.
a
Press
to display the settings screen, and then
display page 7 by pressing
b
Set [Embroidery Foot Auto Down] to [ON].
1
1 When set to [ON], pressing the "Start/Stop" button when
the presser foot is raised automatically lowers the
presser foot before starting embroidering.
Adjusting thread tension
The upper thread tension is changed.
a
Press
.
b
Press
to loosen the upper thread tension. (The
tension number will decrease.)
Press
to tighten the upper thread tension. (The
tension number will increase.)
c
Press
.
■ Correct thread tension
The thread tension is correct when upper thread is just
visible on the wrong side (bottom) of the fabric.
Embroidering
/
.
1 Right side (top) of
fabric
2 Wrong side (bottom)
of fabric
95
4
Advertisement
Table of Contents
