Hoover HC2000 Instructions And Warranty page 6

GENERAL CLEANING AND MAINTENANCE
HOW TO EMPTY THE DUST CONTAINER
IMPORTANT: The dust container filter must always be in place when
operating the vacuum.
Empty the dust container
● After removing the flexible hose, press the
dust cup handle lock button.
● pick up the dust container
press the dust cup cover lock button and empty the container.
●
Remove the dust filter from the container and rinse with
water.
PLEASE NOTE: The dust container filter can only be washed
with water and must be left for 24hrs to dry before next use.
HOW TO CHANGE THE FILTER
1.) A yellow mark on power cord shows the ideal cable
length. Do not expend the cable beyond the red mark.
To rewind the power cord, press the rewinder pedal with
one hand and guide the cord with the other hand.
2.) Press the power switch to switch the appliance on. Use
the electronic speed adjusting to control the suction
power of the cleaner
3.) The suction power can be adjusted with the sliding
control on the angled pipe too