Advertisement
2. PRODUCT DESCRIPTION
1
2
3
4
5
6
1 INPUT button
To switch between the signal's input terminals.
2 MENU button
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
3 c/MODE
When the OSD Menu is displayed:
button
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
4 e d buttons
When the OSD Menu is displayed:
These buttons are used to select an option or
adjust the value of the selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight
brightness.
5 Power button
Pressing this button turns the power on.
6 Power LED
This LED is lit green when in use and orange
when in power-saving mode.
7 Main power switch
8 Power terminal
9 Analog RGB
The analog signal cable is connected here.
input terminal
1 and 2
F DVI-D input
The computer's digital RGB output terminal can
terminal
be connected here.
The separately-sold cable (NL-C01E) is neces-
sary for connection.
It can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-
I29 pin) and which has SXGA output ability.
Depending on the computer to be connected,
correct display may or may not be possible.
G Security lock
By connecting a security lock (commercially
anchor
available) to the security lock anchor, the monitor
is fixed so that it cannot be transported.
The security slot works in conjunction with Kens-
ington Micro Saver Security Systems.
H Ventilation
Note: Never block the ventilation openings as this
openings
may lead to overheating inside the monitor and
result in malfunction.
12
7
8 9 10 11
LL-T19D1 OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
Height adjustment, angle adjustment
Caution:
• Pressure from hands on the LCD panel could cause damage.
• Do not attempt to move the monitor beyond its movement range.
Applying excessive force to move the monitor may damage the
product.
• Be careful not to allow your fingers to be pinched.
Height adjustment
Lowest position
approx. 47mm
approx. 20
• When positioning the display higher, hold the stand tight so that it
does not move together with the display.
Angle adjustment
approx. 5
1 – 3
Highest position
approx. 60
approx. 20
approx. 45
approx. 45
Advertisement
