8. Lift the LCD Panel from the bezel.
9. Remove the fixation screws that secure the panel with the
metal subframe.
When defective, replace the whole unit.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
Mechanical Instructions
TPB1.2HU LA
4.
EN 19
2011-Mar-11