Philips 32PFL3507/56 Service Manual page 16

EN 16 5. TPM8.31A LA
Item Item value
15 ADC_GAIN_B
16 ADC_OFFSET_R
17 ADC_OFFSET_G
18 ADC_OFFSET_B
19 GAMMA_TABLE
20 E-Fuse
21 ORT_MODE
22 RESET_PBS_PWD
23 V-COM
24 VIDEO_PWM_MEDIUM
25 VIDEO_PWM_MINIMUN
26 VIDEO_PWM_MAXIMUN
27 PWM_RATIO_BEST_PICTUR
E
28 PWM_RATIO_STD_TOP
29 PWM_RATIO_STD_BOTTOM
30 PWM_RATIO_BEST_POWER
31 VIDEO_STD_TH_HIGH
32 VIDEO_STD_TH_LOW
33 YPBPR_PHASE
34 AUD_LIMITER_MODE
35 AUD_THRESHOLD_BYTE1
36 AUD_THRESHOLD_BYTE2
37 AUD_THRESHOLD_BYTE3
38 AUD_GAIN_LINEIN
39 AUD_GAIN_HDMI
40 AUD_GAIN_ATV
41 AUD_GAIN_DTV
42 AUD_GAIN_USB
43 TUNER_ID
44 ESTICKER NVM1
45 ESTICKER NVM2
46 ESTICKER NVM3
47 ESTICKER NVM4
48 ESTICKER NVM5
49 ESTICKER NVM6
50 ESTICKER NVM7
51 ESTICKER NVM8
52 ESTICKER NVM9
53 ESTICKER NVM10
54 ESTICKER NVM11
55 ESTICKER NVM12
56 ESTICKER NVM13
57 ESTICKER NVM14
58 ESTICKER NVM15
59 ESTICKER NVM16
60 ESTICKER NVM17
61 ESTICKER NVM18
62 ESTICKER NVM19
63 ESTICKER NVM20
64 ESTICKER NVM21
65 ESTICKER NVM22
66 ESTICKER RESET
67 CIPLUS QUERY
68 CIPLUS UPDATE
69 AQ_TABLE_INDEX
70 LIGHT SENSOR
71 EDID UPDATE
72 TCON_GAMMA_UPDATE
73 AUDIO DEFAULT INIT
74 TTX Enable
75 AGEING MODE
76 VIRGIN_MODE
77 EXIT_FACTORY
How to Exit the Factory mode
Use one of the following m ethods:
• Select EXIT_FACTORY from the menu and press the "OK"
button.
Note: When the TV is switched "off" by a power interrupt, or
normal switch to "stand-by" while in the factory mode, the TV
2012-Jun-08
Service Modes, Error Codes, and Fault Finding
Default value
32" 42" 46" Description
0 Blue ADC gain
128 Red ADC offset
128 Green ADC offset
128 Blue ADC offset
off GAMMA_TABLE
on E-fuse mode
off ORT mode
Press OK Use this to reset the Child Lock
Press OK V-COM
128 128 128 VIDEO PWM Medium value
220 178 178 VIDEO PWM Minimun value
0 0 0 VIDEO PWM Maximun value
100 100 100 PWM ratio best picture
79 79 79 PWM ratio standard top
74 74 74 PWM ratio standard bottom
80 80 80 PWM ratio best power
97 97 97 VIDEO standard threshold high
93 93 93 VIDEO standard threshold low
InValid Not available for this chassis
0 Three modes, 0: off, 1: adaptive mode, 2: fixed mode
0 Limit threshold
0 Limit threshold
16 Limit threshold
4 Line-in audio gain
2 HDMI audio gain
9 8 8 Analogue TV audio gain
15 Digital TV audio gain
2 USB audio gain
135:TCL.F86WT-17-E Displays and changes the Tuner ID with the left and right cursor. Not to be changed when the tuner is replaced
with the correct service part
0 0 0 ESTICKER value
3 3 3 ESTICKER value
6 4 4 ESTICKER value
7 6 6 ESTICKER value
8 7 7 ESTICKER value
9 8 8 ESTICKER value
2 9 9 ESTICKER value
255 2 2 ESTICKER value
255 255 255 ESTICKER value
255 255 255 ESTICKER value
255 255 255 ESTICKER value
11 11 11 ESTICKER value
14 14 14 ESTICKER value
17 15 15 ESTICKER value
18 17 17 ESTICKER value
19 18 18 ESTICKER value
20 19 19 ESTICKER value
13 20 20 ESTICKER value
255 13 13 ESTICKER value
255 255 255 ESTICKER value
255 255 255 ESTICKER value
255 255 255 ESTICKER value
Press OK ESTICKER reset
Press OK Shows the Validity of the CI+ key and the supplier information
Press OK Used to enter a new CI+ code into the NVM. This can only be used when no CI+ code exists in the NVM
1 2 3 Audio Quality index
Press OK Light sersor
Press OK Used to enter a new EDID codes into the NVM
Press OK TCON gamma update
Press OK AUDIO default init
On TTX function on/off
Off Use this for ageing a new LCD panel
Off/On Use this to return the set to virgin mode. Depends whether the set has been used already.
Press OK Exits the Factory mode
will show up in "normal operation mode" as soon as the power
is supplied again. The error buffer will not be cleared.
back to
div. table