Technical Data; Ec Declaration Of Conformity - DeWalt DW432 Manual

BELT SANDER DW432/DW433
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
Belt speed
Sanding surface
Belt length
Belt width
Weight
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
Explosion hazard.
WALT tool. Years of
DW432 DW433
V 230 230
V 230/115 230/115
W 800 800
m/min 420 260 - 420
mm 140 x 75 140 x 75
mm 533 533
mm 75 75
kg 5.6 5.6
EC-Declaration of conformity
DW432/DW433
D WALT declares that these power tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
L (sound pressure) dB(A)*
pA
L (acoustic power) dB(A)
WA
* at the operator's ear
Take appropriate measures for the
protection of hearing.
Weighted root mean square acceleration value
according to EN 50144:
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
E N G L I S H
WALT at the
E
DW432 DW433
85.3 85.3
94 94
DW432 DW433
2 2
< 2.5 m/s < 2.5 m/s
19