Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl MS 500i Instruction Manual

21 Spare Parts and Accessories

Pitch Drive link
gauge/groove
width
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

22 Disposal

22.1 Disposing of Chainsaw
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the chainsaw, guide bar, saw
chain, fuel mix, gasoline, two-stroke engine oil,
accessories and packaging in accordance with
0458-809-0121-B. VA0.A21.
Length Guide bar
Rollomatic E
Rollomatic ES
50 cm
Rollomatic ES
Light
Duromatic
Rollomatic ES
55 cm
Duromatic
Rollomatic E
Rollomatic ES
63 cm
Rollomatic ES
Light
Duromatic
Rollomatic ES
71 cm
Rollomatic ES
Light
75 cm Duromatic
Rollomatic ES
80 cm
Light
Rollomatic ES
90 cm
Light
Nose Number of
sprocket drive links
teeth
11
-
11
-
11
-
11
-
11
11
local regulations and environmental require‐
ments.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 500i Chainsaw
ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
– Category: Chainsaw
– Make: STIHL
– Model: MS 500i, MS 500i W
– Serial identification: 1147
– Displacement: 79.2 cc
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN ISO 11681‑1, EN 55012 and
EN 61000‑6‑1.
English
Saw chain
72
76
36 RD3 (Type
84
3683)
91
98
105
114
27