Cisco SFE2000 Release Notes page 17

Release Notes for Cisco Small Business SFE2000 Series 24-port 10/100 Ethernet Switches
Admin > Diagnostics > Copper Ports
The following issues were found:
•
Cable length for Fast Ethernet Copper Ports is not displayed.
•
In a stacked configuration, running an optical test may result in traffic lost on
the GE port. Recommended Workaround: Disable STP on the port.
•
After pressing the "Test" button, the "Advance" button is not displayed.
Recommended Workaround: After switching to another page and returning
to this page, the cable length and the "Advance" button are displayed.
Web Pages are Displayed Abnormally in IE 5 and Above
In some cases not all images are loaded, in other cases "Page not found" error may
appear.
In these situations, users need to verify that the IE registry does contain non-
standard WEB server connection settings.
1. Start Registry Editor (Regedt32.exe).
2. Locate the following key in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre
ntVersion\Internet Settings
3. If the following entries exist, delete them:
-
MaxConnectionsPer1_0Server Value Name
-
MaxConnectionsPerServer
4. Quit Registry Editor.
IE normally limits the number of simultaneous TCP/IP connections made to a
single web server. Windows limits HTTP 1. 1 connections to two
simultaneous connections. RFC2068 mandates the two connection limit.
These settings can be changed only through IE registry to any non standard
value. See the following resources for more information:
•
Microsoft Help and
http://support.microsoft.com/kb/282402
•
Hypertext Transfer Protocol
http://www.ietf.org/rfc/rfc2068.txt
Support:
HTTP/1.1:
Release Notes
17