Storing The Machine - Stihl GS 461 Instruction Manual

17 Storing the Machine

► Lift the air baffle (1) up and off
► Unplug spark plug boot (2)
► Unscrew spark plug
16.2 Checking the Spark Plug
► Clean dirty spark plug.
► Check electrode gap (A) and readjust if neces‐
sary – see "Specifications".
► Rectify the problems which have caused foul‐
ing of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
0458-761-0121-B
1
2
A
1
WARNING
Arcing may occur if the adapter nut (1) is loose
or missing. Working in an easily combustible or
explosive atmosphere may cause a fire or an
explosion. This can result result in serious inju‐
ries or damage to property.
► Use resistor type spark plugs with a properly
tightened adapter nut.
16.3 Installing the spark plug
► Install in the spark plug and tighten
► Press on the spark plug boot (1) firmly
► Insert the air baffle (2) from above
► Mount filter cover
17 Storing the Machine
If the machine is to remain out of use for approx.
3 months or more
► Drain and clean the fuel tank in a well ventila‐
ted place
► Dispose of fuel in accordance with the regula‐
tions and having regard for the environment
► Run the engine until the carburetor is dry, this
helps to prevent the carburetor diaphragms
sticking together
► Remove, clean and dry diamond abrasive
chain and guide bar, and spray with STIHL
multispray – in particular the bearing of the
sprocket nose – corrosion protection.
► Thoroughly clean the machine - pay special
attention to the cylinder fins and air filter
► Store machine in a safe and dry place. Protect
against unauthorized use (e. g., by children)
English
2
1
21