Limitations And Restrictions; Important Notes - Cisco Catalyst 4224 Release Notes

•
•

Limitations and Restrictions

The following MIBs are supported:
•
•
•
•
The following Cisco proprietary MIBs are supported:
•
•
•
The following MIB will be supported later:
•

Important Notes

The following sections contain important notes about Cisco IOS Release 12.1(5)YE3 that can apply to
the Cisco Catalyst 4224 Access Gateway Switch.
Hardware Change in Catalyst 4224
Cisco IOS Release 12.1(5)YE3 is being shipped in conjunction with a hardware Engineering Change
Order (ECO) for the Catalyst 4224 platform. Cisco IOS Release 12.1(5)YE3 is backward compatible
with previous non-ECO hardware versions of the Catalyst 4224.
Cisco recommends that you do not run software releases prior Cisco IOS Release 12.1(5)YE3 on the
Note
ECO hardware because serial WICs running in slot 1 might not operate correctly.
You can recognize ECO hardware by running the cookie command from ROMMON and looking at the
hardware revision level. All boards with a revision level of 1.3 (Major 01/Minor 03) or greater are ECO
hardware.
OL-1798-01
CSCdv28941
The ibd feature set is bundled with snasw; they need to be separated.
The ibd feature set is now available as a separate image or bundled with snasw.
CSCdv45074
Serial TXCLK on SCC2 not programmed correctly.
The serial transmit clock was reprogrammed to produce the proper output signal.
SNMP MIB-II
ENTITY-MIB
IF-MIB
BRIDGE-MIB
CISCO-PROCESS-MIB
CISCO-MEMORY-POOL-MIB
CISCO-CDP-MIB
CISCO-STACK-MIB
Limitations and Restrictions
Limitations and Restrictions
5