Identification Plate; Engine Identification - Vauxhall VIVARO Owner's Manual

Identification plate

The identification plate is located on
the right-hand door pillar.
Information on identification plate:
1 : Manufacturer
2 : Type approval number
3 : Vehicle Identification Number
4 : Permissible gross vehicle weight
rating in kg
5 : Permissible gross train weight
in kg
6 : Maximum permissible front axle
load in kg
7 : Maximum permissible rear axle
load in kg
8 : Engine coding
9 : Vehicle-specific or country
specific data
Notice
The identification plate on your
vehicle may differ from the
illustration shown.
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight.
Vehicle's kerb weight depends on the
specification of the vehicle, e.g.
optional equipment and accessories.
Refer to the EEC Certificate of
Technical data
Conformity provided with your vehicle
or other national registration
documents.
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.

Engine identification

Vivaro has diesel engines with four
cylinders and a piston displacement
of 1598 cm 3 . The engine identifier
code starts with R9M and identifies
the power and the emission category.
It is part of the identification plate and
stamped on the engine cylinder block.
For further technical data, refer to the
EEC Certificate of Conformity
provided with your vehicle or other
national registration documents.
It is also possible, using the Vehicle
Identification Number (VIN), to
determine the engine type that is
installed in your vehicle. For further
information consult a workshop.
207