Table of Contents
Advertisement
TROUBLESHOOTING
TROUBLESHOOTING
Problem
Possible Solution
Bad
Wireless Sensor
Reception
T 11II
no bars
Relocate the main unit and/or the wireless
sensor. Both units must be within 330 feet
(100m} from each other. Make sure both
units are placed at least 3 feet (.91 m} from
other electronic appliances and devices that
may interfere with the wireless
communication (such as TV's, microwaves,
computers etc} . NOTE: It may take up to 20
minutes for the main unit to re-synchronize
with the sensor when batteries are replaced.
Use lithium batteries in sensor when
temperature is below -4°F (-20°C} .
No Wireless Sensor Data
(no communication)
' I ,
no bars and flashing
- T 1
" - "data
, I
If wireless reception is bad (no bars}, see
"Bad Reception" section above. The wireless
ID setting on each unit must match for all
units to communicate properly. See "Set
Wireless ID" on the next page.
Display Console
Screen Not Working
Batteries may need replacing
Set Wireless I.D.
This wireless thermometer
uses long range 433mhz
radio frequency for
communication.
In the event that you have
reception problems due to
interference, both the main
unit and the wireless sensor
have a selectable wireless
ID. The ID switches are
located within the battery
compartments of the
display console and the
integrated wireless sensor.
You may choose A, B or C;
Both wireless ID
but both the main unit and
switches
the wireless sensor ID's
must match
must match for successful
synchronization.
Please DO NOT return product to the retail store .
For technical assistance and product return information , please call
Customer Care :
877-221-1252
Mon. - Fri. 8:00 A.M. to 4:30 P.M . (CST]
www.chaneyinstrument.com
PRODUa REGISTRATION
To receive product updates
and information,
Log on
to
www.chaneyinslrument.com
22
23
Advertisement
Table of Contents
