Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 18 3517 10 11 DISPLAY FRONT 11. Display Low Battery Indicator 1. Outdoor Sensor Signal Strength 12. Date 2. Current Outdoor Temperature Arrow icon indicates the direction 13. Intelli-Time Clock ® temperature is trending. Automatically updates itself for 3.
Page 4
Features & Benefits DISPLAY BACK 5. A-B-C Switch 1. Integrated Hang Hole ID code that must match sensor’s For easy wall mounting. A-B-C switch to ensure units Button synchronize. For setup preferences and viewing today’s HIGH records. 6. RESET Button For full reset to factory defaults.
A-B-C switch setting inside the battery Install or Replace Batteries compartment. AcuRite recommends high quality 2. Insert 2 x AA batteries into alkaline or lithium batteries for the battery compartment, as the best product performance.
Display Unit Setup Set the A-B-C Switch Plug Power Adapter into Electrical Outlet Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. Install or Replace Backup You must select the same letter Batteries choices for both the display unit and the sensor in order for the...
Intelli-Time Clock ® Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time. Set the Time, Date &...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
Troubleshooting Problem Possible Solution If the wireless signal indicator shows no bars: • Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet No outdoor sensor (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves,...
Page 11
13). Once the new battery is installed, time and date changed and the will need to be set manually. time is not correct If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
3. Press and release the “SET” button until barometric pressure is shown on the display. Use the “▲” or “▼” buttons to calibrate the pressure higher or lower. 4. Press the “SET” button to confirm the calibration adjustment. Note: The “ ”...
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC Outdoor: 1% to 99% RH HUMIDITY RANGE Indoor: 1% to 99% RH 330 ft / 100 m depending on home construction materials WIRELESS RANGE 433 MHz OPERATING FREQUENCY Display: 5vdc power adapter...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 AcuRite Visit us at www.