Cisco Catalyst 2960 Series Datasheet page 9

© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
● 48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one
WS-C2960-48TC-L
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base image installed
● 7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
WS-C2960G-8TC-L
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Compact size with no fan; magnet included
● LAN Base image installed
● 20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
WS-C2960G-24TC-L
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base image installed
● 44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
WS-C2960G-48TC-L
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base image installed
Cisco Redundant Power System 2300 and blower, no power supply
PWR-RPS2300
Spare bay insert for Cisco Redundant Power System 2300
BLNK-RPS2300=
Spare RPS2300 cable for Cisco Catalyst 2960-24PC-L and 2960-24LT-L switches
CAB-RPS2300-E=
Spare RPS2300 cable for Cisco Catalyst 2960 switches except Catalyst 2960-24PC-L and 2960-
CAB-RPS2300=
24LT-L switches
Spare 45CFM blower for Cisco Redundant Power System 2300
BLWR-RPS2300=
Cisco Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply spare
C3K-PWR-750WAC=
Power adapter for Cisco Catalyst 2960PD-8TT-L compact switch
PWR-A=
Cable guard for Cisco Catalyst 2960-8TC compact switch
CBLGRD-C2960-8TC=
Cable guard for Cisco Catalyst 2960G-8TC compact switch
CBLGRD-C2960G-8TC=
Rack-mount kit for Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
RCKMNT-19-CMPCT=
Spare rack-mount kit for Cisco Catalyst 2960 Series
RCKMNT-1RU=
1 RU recessed rack-mount kit for Cisco Catalyst 2960 Series
RCKMNT-REC-1RU=
1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
GLC-LH-SM=
1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength
GLC-SX-MM=
1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength
GLC-ZX-SM=
1000BASE-T SFP transceiver module for Category 5 copper wire
GLC-T=
Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
1000BASE-BX10 SFP transceiver module for single-strand SMF, 1490-nm TX / 1310-nm RX
GLC-BX-D=
wavelength
1000BASE-BX10 SFP transceiver module for single-strand SMF, 1310-nm TX / 1490-nm RX
GLC-BX-U=
wavelength
100BASE-FX SFP module for Gigabit Ethernet ports, 1310-nm wavelength, 2 km over MMF
GLC-GE-100FX=
Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
100BASE-FX SFP module for 100-Mb ports, 1310-nm wavelength, 2 km over MMF
GLC-FE-100FX=
100BASE-LX10 SFP module for 100-Mb ports, 1310-nm wavelength, 10 km over SMF
GLC-FE-100LX=
100BASE-BX10-D SFP module for 100-Mb ports, 1550-nm TX /1310-nm RX wavelength, 10 km
GLC-FE-100BX-D=
over single-strand SMF
100BASE-BX10-U SFP module for 100-Mb ports, 1310-nm TX/1550-nm RX wavelength, 10 km
GLC-FE-100BX-U=
over single-strand SMF
Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G FC (gray)
CWDM-SFP-1470=
Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (violet)
CWDM-SFP-1490=
Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue)
CWDM-SFP-1510=
Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green)
CWDM-SFP-1530=
Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (yellow)
CWDM-SFP-1550=
Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange)
CWDM-SFP-1570=
Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red)
CWDM-SFP-1590=
Data Sheet
Page 9 of 11