Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Network Management and Installation Tools
The Cisco 815 supports a range of network-management and ease-of-installation tools.
CiscoWorks, a Web-based network management suite, provides the ability to remotely configure,
administer, monitor, and troubleshoot the Cisco 815. With the increased visibility into network
behavior, customers are able to quickly identify performance bottlenecks and track long-term
performance trends. CiscoWorks also provides sophisticated configuration tools to optimize
bandwidth and utilization across expensive and critical WAN links in the network.
CiscoView, part of CiscoWorks, is a Web-based tool that graphically provides real-time status of
the Cisco 815. It can navigate to display monitoring information on interfaces and provide dynamic
status, statistics, and comprehensive configuration information.
Product Specifications
Table 3.
Cisco 815 Product Specifications
Features
Physical Interfaces/Ports
Dimensions and Weight
Power
Environmental
Safety
Specifications
● One F-type standard coax interface for HFC network
Designed to support CableLabs
◦
● One 10/100BASE-TX Fast Ethernet port (RJ-45)
Automatic speed detection
◦
Automatic duplex negotiation
◦
IEEE 802.1Q VLAN trunking and inter-VLAN routing
◦
● One auxiliary (AUX) port
RJ-45 jack with EIA/TIA-232 interface
◦
Asynchronous serial data terminal equipment (DTE) with
◦
full modem controls: Carrier Detect, data set ready (DSR),
Request To Send (RTS), Clear To Send (CTS)
Asynchronous serial data rates up to 115.2 kbps
◦
● One console port
RJ-45 jack with EIA/TIA-232 interface
◦
Asynchronous serial DTE
◦
Transmit/receive rates up to 115.2 kbps (default 9600 bps,
◦
not a network data port)
No hardware handshaking such as RTS/CTS
◦
● Hardware encryption for IPsec VPN on 815-VPN model
● Width: 11.2 in. (28.4 cm)
● Height: 3.1 in. (7.85 cm)
● Depth: 8.7 in. (22.1 cm)
● Weight (maximum): 2.9 lb (1.32 kg)
● Locking connector on power socket
● AC input voltage: 100 to 240VAC
● Frequency: 47 to 64 Hz
● AC input current: 0.5 amps
● Power dissipation: 20W (maximum)
● Operating temperature: 32 to 104° F (0 to 40° C)
● Nonoperating temperature: –4 to 149° F (–20 to 65° C)
● Relative humidity: 10 to 85% noncondensing operating; 5 to
95% noncondensing, nonoperating
● UL 1950
● CSA 22.2—No. 950
● EN60950
● EN41003
● AUSTEL TS001
● AS/NZS 3260
● ETSI 300-047
● BS 6301 (power supply)
Data Sheet
®
DOCSIS 2.0, 1.1, 1.0
Page 6 of 9
Advertisement
