Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Features
Benefits
PacketCable™ multimedia
Offers traffic prioritization or bandwidth reservation for delay-sensitive voice, video, and
data services over the cable infrastructure.
AutoSecure
Facilitates rapid implementation of firewall and security policies to optimize network
security with a single Cisco IOS Software command.
Access Control Lists (ACLs)
Helps filter traffic based on the specified criteria and prevents malicious attacks.
Complete Security and VPN Capability
Cisco IOS Firewall and URL
Application inspection, transparent and stateful firewall, ACLs, and URL filtering protect
filtering
the network from unauthorized user access. URL filtering prevents inappropriate
Websites from being accessed and downloading of offensive content.
IPS
Detects harmful network activity and generates alarms to warn of threats and intrusion
attempts. New IPS signatures can be dynamically loaded.
Site-to-site VPN
Connects remote access clients and branch offices to central sites more cost-effectively
and flexibly than networks using leased lines, Frame Relay, or ATM.
Dynamic Multipoint VPN
Allows users to better scale IPsec VPNs by combining generic routing encapsulation
(DMVPN)
(GRE) tunnels, IPsec encryption, and Next Hop Resolution Protocol (NHRP) while
offering multicast and QoS.
VPN tunneling with IPsec,
Allows any standards-based IPsec or L2TPv3 client to interoperate with Cisco IOS
GRE, L2TPv3
Software tunneling technologies.
Cisco Easy VPN
Allows the router to act as remote VPN client and have VPN policies pushed down from
the VPN concentrator.
Network Admission Control
Helps ensure client devices are using the most up-to-date antivirus application and
(NAC)
signature files and protects the network from harmful threats by prohibiting network
access if outdated versions are used.
Simplified Management and Ease of Deployment
Independent router and
Unique ability to manage and upgrade cable modem firmware and configuration using
cable modem management
cable modem termination system (CMTS) independent of the router configuration. Offers
domains
cable operator independent domain of cable interface management.
IP Service-Level Agreement
Provides the ability to monitor network performance and collect real-time statistics on
(SLA)
delay, jitter, and response times to verify and report on SLAs.
Manageable using Simple
Allows central monitoring, configuration, and diagnostics for all functions integrated in the
Network Management
Cisco router, reducing management time and costs.
Protocol (SNMP) v3
Supported Cable MIBs
Cisco Config Express (CX)
Enables direct shipment from Cisco to the end customer or branch office with factory-
loaded configurations for high-volume deployments.
3
CiscoWorks
CiscoWorks network management software provides common management across all
Cisco routers and switches
Cisco ConfigMaker support
Allows for network setup using the Cisco ConfigMaker application, a wizard-based
software tool that helps to easily configure and address Cisco routers, access servers,
hubs, switches, and networks.
LED status indicators
Provide at-a-glance indications for power, network activity, and interface status.
Reliability
WAN link redundancy
Allows the 10/100Base-T Fast Ethernet port to be used as an alternate WAN link.
Dial-on-demand routing
Allows automatic backup of WAN connection using external analog modem in case of a
primary link failure.
Hot Standby Router Protocol
Provides high network availability.
(HSRP)
2
2 Supported in Advanced Security Image.
3
Supported post-FCS
2
● DOCSIS-IF-MIB
● DOCSIS-CABLE-DEVICE-MIB
● DOCSIS-CABLE-DEVICE-TRAP-MIB
● DOCSIS-QOS-MIB
● IF-MIB
● RFI-MIB
Data Sheet
Page 5 of 9
Advertisement
