Dell Precision 5520 Owner's Manual page 37

Table 5. Advanced (continued)
Option
Multi Core Support
Intel TurboBoost
C-States Control
Audio
Keyboard Illumination
USB Configuration
Touchscreen
AC Behavior
Wake On LAN
Advanced Battery Charge
Configuration
Block Sleep
Auto On Time
Peak Shift
USB Wake Support
LCD Brightness
USB Emulation
USB PowerShare
USB Wake Support
SATA Operation
Adapter Warnings
Multimedia Key Behaviour
Battery Health
Battery Charge
Configuration
Miscellaneous Devices
Description
Specifies whether the processor will have one or more cores enabled. All (Default Setting)
Enables or disables the Intel TurboBoost mode of the processor. Enabled (Default Setting)
This option enables or disables additional processor sleep states. Enabled (Default Setting)
Enables or disables the integrated audio controller. Enabled (Default Setting)
This field lets you choose the operating mode of the keyboard illumination feature. Disabled
(Default Setting)
Allows you to configure the integrated USB controller.
Default Enabled: Enable Boot Support, Enable Thunderbolt Ports; Always Allow Dell Docks;
Enable External USB Port
This field controls whether the touchscreen is enabled or disabled. Enabled (Default
Setting)
Allows the system (if OFF or in Hibernate) to power-on automatically when AC is inserted.
Allows the computer to power up from the off state when triggered by special LAN.
Disabled (Default Setting)
Maximizes battery health while still supporting heavy use during the work day. Disabled
(Default Setting)
Lets you to block entering to sleep (S3 state) in OS environment. Disabled (Default
Setting)
Sets the time of day when you would like the system to turn on automatically. Disabled
(Default Setting)
Minimizes AC power usage at times of peak demand. Disabled (Default Setting)
Allows you to enable USB devices to wake the system from Standby. Enabled (Default
Setting)
This options sets the panel brightness independently for Battery and AC power.
Allows you to enable or disable the USB Emulation feature.
Enabled (Default Setting)
Allows you to enable or disable the USB PowerShare feature.
Enabled (Default Setting)
This option allows you to enable USB devices to wake the system from Standby.
Disable(Default Setting)
Displays the SATA Operation information.
Allows you to enable or disable the adapter warnings feature.
Function Key (Default Setting)
Displays the battery health information.
Adaptive (Default Setting)
Allows you enable or disable the various on board devices. The options are:
● External USB Ports - Enabled (Default Setting)
● USB Debug - Disabled (Default Setting)
System Setup 37