Table 6. ThinkSystem RAID 5350–8i Status LEDs (continued)
LED
AVS_ENB (DS2)
PAL_DEBUG (DS10)
About ThinkSystem RAID 5350–8i
The ThinkSystem RAID 5350–8i is a SAS Host Bus Adapter with these features:
Figure 5. ThinkSystem RAID 5350–8i
1
Mounting bracket
2
HDA mode jumper
3
UART
Note: The HDA mode jumper is only for debug purposes. It disables the firmware on the controller so that
special tools can be used to remove the controller. These are only provided at the explicit direction of
support.
Table 7. ThinkSystem RAID 5350–8i specifications
Form factor
Bus compatibility
PCIe bus width
Data transfer rate
Function
Color
Green
• On = Adaptive Voltage Scaling (AVS) enabled
• Off = Adaptive Voltage Scaling (AVS) disabled
Yellow
Debug LED control signal
Low-profile MD2 (smaller than MD2)
PCIe 3.0
x8
12 Gb/s per port
4
Internal mini-SAS HD connectors (CN0, CN1)
5
PCIe x8 connector
.
Chapter 2
Adapter Characteristics
9