Panasonic KX-TG8200BXB Service Manual page 9

4.2.2. Power Supply Circuit
The power is supplied to the DECT BBIC, RF Module, EEPROM and Charge Contact from AC Adaptor (+6.5 V) as shown in
Fig.101. The power supply is as follows;
• DECT BBIC (IC7):
CN2 (+6.5 V) → IC1 → Q9 → IC7
CN2 (+6.5 V) → IC1 → Q8 → IC7
• RF Module (IC10):
CN2 (+6.5 V) → IC1 → Q8 → IC10 (Radio Transceiver) (Digital)
CN2 (+6.5 V) → IC1 → Q9 → IC10 (Radio Transceiver) (Analog)
CN2 (+6.5 V) → IC1 → R125 → IC10 (Power AMP)
• EEPROM (IC5):
CN2 (+6.5 V) → IC1 → Q9 → IC5
• Charge Contact (TP16):
CN2 (+6.5 V) → R57 → R56 → R55 → D22 → TP16
<Fig.101>
9
KX-TG8200BXB/KX-TGA820BXB