Table 2.4-1 External Probe Data - Fujitsu MB2145-507 Hardware Manual

Table 2.4-1 External Probe Data

Color External probe data
Black CH0 (channel 0 input)
Brown CH1 (channel 1 input)
Red CH2 (channel 2 input)
Orange CH3 (channel 3 input
Yellow CH4 (channel 4 input)
Notes:
• To connect the external probe to the user system, check the signal name indicated on the
label on the external probe and connect it to the user system with a test clip.
• The connection of the test clip and signal line is not strong. Do not add stress by pulling on
the external probe.
• Firmly connect the connector that connects the external probe to the emulation pod.
2.4 Connecting the External Probe
Color External probe data
Green CH5 (channel 5 input)
Blue CH6 (channel 6 input)
Purple CH7 (channel 7 input)
Gray CK (external clock input)
Black GND (ground)
21