General Control - Sharp FV-DB1E Operation Manual

General control

" To turn the power on
Press the ON/STAND-BY button to turn the power on.
When turned on for the first time, the unit scans radio stations
automatically to create the station list (see page 8).
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The backlight brightness changes after a while.
After 30 seconds of inactivity, the backlight dims (when using the AC
adaptor) or turns off (when using batteries). Press a button to turn it
back on.
" Adjusting the volume
Press the VOLUME (+ or -) button to increase or decrease the vol-
ume.
.....
0 1 2
" Adjusting the bass
1 Press the SOUND button to select "Bass".
2 Within 30 seconds, press the VOLUME control to adjust the bass.
...
5 0
" Adjusting the treble
1 Press the SOUND button to select "Treble".
2 Within 30 seconds, press the VOLUME control to adjust the treble.
...
5 0
" Checking date and time
When a DAB (Digital Audio Broadcasting) station is received, date
and time are set automatically.
Press the CLOCK button until time and date ap-
pear on the display.
When "No time date" appears, receive a DAB station to set date
and time.
Notes:
! If memory batteries are not inserted or low, the clock setting will
be lost. This can be avoided when the AC adaptor is connected.
The clock setting will be lost if the unit is powered only by the
main batteries and set to the power stand-by mode.
! Time is displayed in 24-hour format.
04/4/12 FV-DB1E_1.fm
FV-DB1E
39 40
...
+5
...
+5
7
TINSEA025SJZZ
2