Sound Control - Sharp CD-DP2500H Operation Manual

SOUND CONTROL

Downloaded from: http://www.usersmanualguide.com/
(Main unit) (Remote control)
(Main unit) (Remote control)
(Main unit) (Remote control)
X-BASS indicator
Volume
(Main unit operation)
When the VOLUME control is turned clockwise, the volume
will increase. When it is turned anti-clockwise, the volume will
decrease.
(Remote control operation)
Press the VOLUME button to increase the volume and
the VOLUME button to decrease the volume.
Servo powered volume:
The VOLUME control automatically comes out when the
power is turned on, and goes back when the unit is set to
the stand-by mode.
Note:
Do not push in the VOLUME control forcibly with your finger.
Pre-programmed equalizer
When the EQ (EQUALIZER MODE) button is pressed, the cur-
rent mode setting will be displayed. To change to a different
mode, press the EQ (EQUALIZER MODE) button repeatedly.
FLAT: The sound is not modified.
ROCK: Bass and treble are emphasised.
POPS: Bass and treble are slightly emphasised.
JAZZ: Treble is cut a little.
CLASSIC: Treble is reduced a lot.
VOCAL: Vocals (midrange tones) are emphasised.
Extra bass (X-BASS)
When the power is first turned on, the unit will enter the extra
bass mode which emphasises the bass frequencies, and "X-
BASS" will appear.
To cancel the extra bass mode, press the X-BASS/DEMO (X-
BASS) button.
"X-BASS" will disappear.
Balance
(Remote control operation)
Press the BALANCE Z (LEFT) button to decrease the level of
the right speaker, and press the BALANCE Y (RIGHT) button
to decrease the level of the left speaker.
12