Table of Contents
Advertisement
Wheels - Tyre Pressure, & Instructions for customer
Use the recommended levers while removing
the Tyre / Tube for puncture work. This will
avoid any damages to the edges / scratches
on paint of the wheel.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better
fuel consumption.
2 kgf/cm (28 PSI)
Front
2 kgf/cm (28 PSI)
Rear(Solo)
Rear (with Pillion)
2.25 kgf/cm (32 PSI)
Note : Incase the motorcycle is fitted with
imported tyres. compliance to respective indian
standard & central motor vehicle rules has been
ensured.
• Tyre warranty is settled by tyre manufacturer.
• Decision is taken based on tyre wear and
running of vehicle.
• BAL settles tyre warranty only for imported
tyres.
2
2
2
Instructions for customer
• Do Not REV UP Engine in standstill condition.
• Don't use adulterated fuel or fuel additives as it
will result in rusting & clogging of engine parts.
• Never drive by disconnecting speedometer
cable.
• Do not keep the cleaning cloth in the vicinity of
high temperature zone e.g. Engine, Silencer
Assembly, Catalytic convertor, Starter motor,
etc.
19
Advertisement
Table of Contents
