11/2016 V1.0.61
Highlights
Logging all EIB-Telegrams (also non-EIS)
Displaying the complete group address range (main group 0 – 31)
Logging of fragmented bus telegrams
Fragmented bustelegrams are related to actual telegram source (sending device)
Logging of line disturbances or EIB power fails
Shows all data in human readable form
Easy to use
Long time logging possible
Filtered or unfiltered display (e.g. in group address order)
Collision detection
Permanently refreshed statistics (bargraph) of
number of telegrams to detect bus load sources
number of repeats to detect telegrams without ACK
number of errors (e.g. NACK, BUSY, collision)
number of telegrams based on physical addresses
Permanently reordering of bargraph display (descending from left to right)
Useful functions like easy reset of all device-programming buttons, or a device
searching window, or a 2-/3-level group address calculator.
Measuring of real bit times to detect wiring errors
Busmonitoring is done even while sending telegrams !
Function keys can be used to send bustelegrams or telegram lists
Sending telegrams can be related to various EIS-Types
You can read, write and edit bus devices
Email alarm function on high bus load, bus voltage loss, EIBWeiche removed,
alarming group address telegram
All bus devices can be reprogrammed to ACK-devices
Simultaneous diagnostics of local EIB and EIB-LAN telegrams while using IP-routers
and DALI-telegrams while using DALI-Weiche devices.
EIBDoctor includes EIBWeiche, the open serial or USB-interface
Owners manual is printed directly onto the case of EIB-Weiche
Includes: ActiveX, EIB.VB, ASCII, OPC-Server and visualization
Support for ETS2 (from version 1.1b) and ETS3 / ETS4 / ETS5
Field of application
Commissioning of a new EIB installation
Analyzing an existing EIB installation
Configuring b+b EIB devices
© 1999 - 2016 b+b Automations- und Steuerungstechnik GmbH
Manual EIBDoctor
6/56